manualshive.com logo in svg

Yamaha MIXING CONSOLE, Руководство пользователя

Поделиться
Скачать
Yamaha MIXING CONSOLE Скачать руководство пользователя страница 239

Initializing the 01V96

239

01V96—Owner’s Manual

Other Functions

19

Initializing the 01V96

You can delete all currently-recorded settings and restore the factory-preset values, and reset 
the Operation Lock password to its initial setting. Follow the steps below.

1 Make sure that the power to the 01V96 is turned off.

2 While holding down the SCENE MEMORY [STORE] button, turn on the 

POWER ON/OFF switch.

After a moment, the 01V96 displays the following confirmation window.

3 To reset the 01V96 to factory default settings, move the cursor to the INI-

TIALIZE button, then press [ENTER].

To cancel the initialization operation, move the cursor to the CANCEL button, then press 
[ENTER].

When the internal data is thoroughly overwritten, the 01V96 restarts using the factory set-
tings.

4 To reset the Operation Lock password to its initial setting, in Step 2, move 

the cursor to the PASSWORD button, then press [ENTER].

The password is reset to “1234”.

If you do not take any action after the confirmation window appears, the window automat-
ically closes and the 01V96 restarts without being initialized.

Note:  

• If you initialize the 01V96 to the factory-preset values, all Scene, library and other data you 

stored previously will be erased. Proceed with caution.

• If you want to keep the current internal data, be sure to first back up the data using the 

included Studio Manager software.

Tip:  

• You can also store the data to an external MIDI device, such as a MIDI data filer, by using 

MIDI Bulk Dump (see page 222).

Содержание MIXING CONSOLE















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды