manualshive.com logo in svg

Yamaha midnight star XVS1300A, Руководство пользователя

Поделиться
Скачать
Yamaha midnight star XVS1300A Скачать руководство пользователя страница 78

PERIODIC MAINTENANCE AND ADJUSTMENT

6-36

6

Engine overheating

WARNING

EWAT1040

●

Do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be
blown out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled.

●

Place a thick rag, like a towel, over the radiator cap, and then slowly rotate the cap counterclockwise to the de-
tent to allow any residual pressure to escape. When the hissing sound has stopped, press down on the cap
while turning it counterclockwise, and then remove the cap.

TIP

If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant
as soon as possible.

Wait until the 
engine has cooled.

Check the coolant level in the 
reservoir and radiator.

The coolant level 
is OK.

The coolant level is low.
Check the cooling system
for leakage.

Have a Yamaha dealer check

and repair the cooling system.

Add coolant. (See TIP.)

Start the engine. If the engine overheats again, 

have a 

Yamaha dealer check 

and repair the cooling system.

There is
leakage.

There is 
no leakage.

U11CE4E0.book  Page 36  Friday, December 3, 2010  9:12 AM

Содержание midnight star XVS1300A



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды