Yamaha midnight star XVS1300A Скачать руководство пользователя

Страница: 51 / 90

PERIODIC MAINTENANCE AND ADJUSTMENT

6-9

3. Remove the spark plug as shown,

with the spark plug wrench includ-
ed in the additional tool kit, which
was handed out separately at the
purchase of the vehicle.

To check the spark plugs

1. Check that the porcelain insulator

around the center electrode on
each spark plug is a medium-to-
light tan (the ideal color when the
vehicle is ridden normally).

2. Check that all spark plugs installed

in the engine have the same color.

TIP

If any spark plug shows a distinctly dif-
ferent color, the engine could be oper-
ating improperly. Do not attempt to
diagnose such problems yourself. In-
stead, have a Yamaha dealer check
the vehicle.

3. Check each spark plug for elec-

trode erosion and excessive car-
bon or other deposits, and replace
it if necessary.

4. Measure the spark plug gap with a

wire thickness gauge and, if nec-
essary, adjust the gap to specifica-
tion.

To install a spark plug

1. Clean the surface of the spark plug

gasket and its mating surface, and
then wipe off any grime from the
spark plug threads.

2. Install the spark plug with the

spark plug wrench, and then tight-
en it to the specified torque.

1. Spark plug cap

1. Spark plug wrench

Specified spark plug:

NGK/LMAR7A-9

1. Spark plug gap

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

Tightening torque:

Spark plug:

13 Nm (1.3 m·kgf, 9.4 ft·lbf)

U11CE4E0.book Page 9 Friday, December 3, 2010 9:12 AM

Содержание midnight star XVS1300A



























































































Результаты поиска

Содержание midnight star XVS1300A

Отзывы:

Похожие инструкции для midnight star XVS1300A

Бренды по названию

Популярные бренды

Yamaha midnight star XVS1300A, Руководство пользователя

Результаты поиска

Содержание midnight star XVS1300A

Отзывы:

Похожие инструкции для midnight star XVS1300A

Бренды по названию

Популярные бренды