5.
If necessary, confirm that the firmware was correctly updated.
①
After starting the unit in the usual manner, simultaneously press the FX1, GEQ, and
USB buttons on the top panel.
②
The versions of the main program and the boot program appear on the display.
Confirm that the main program version is the same as the one you loaded. The following
example screen is from version 1.0.
This completes the update procedure of the MGP32X/MGP24X firmware.
Yamaha Corporation, All Rights Reserved.
© 2013 Yamaha Corporation
A0
MGP32X/MGP24X Firmware Update Guide
4
