3.
Press Knob 2 to start writing the main program.
Caution:
Do not remove the USB storage device or power-off the MGP32X/MGP24X while
accessing the USB storage device.
①
When reading of the program data from the USB storage device starts, the message
shown below appears on the display (for about 10 minutes).
②
When writing to the MGP32X/MGP24X starts, the message shown below appears on
the display (for about one minute).
③
When verifying the program data after writing starts, the message shown below
appears on the display.
4.
When writing is completed, and the message shown below appears on the
display, press Knob 2 to restart.
If restarting is not necessary, simply turn off the power.
MGP32X/MGP24X Firmware Update Guide
3
