background image

MGP32X/MGP24X     Owner’s Manual

35

Recording/Playing back

NOTE

• The file name is indicated if there is no title or artist information of 

the song. For WAV format files, the file name is indicated since 
there is no title or artist information in the file. 

• The title, artist information, and file name support half-size alpha-

bet and numbers only. Other characters are converted into “

.”

• “Recording…” appears at the location of the title while recording.

4.

Press the REW or FWD button in the transport 
section to select the playback song, and then 
press the PLAY button. 

Playback starts.

5.

Adjust the sound volume of the song.

When outputting to the STEREO bus or 
MONITOR OUT

Rotate the USB IN knob to adjust the volume.

When outputting to the channel 29/30 {21/22}

Use the channel fader to adjust the volume.

NOTE

• Gain may be high for an audio file encoded from the audio 

CD. As necessary, adjust the gain as follows: press the USB 
button 

 call up the “(3/3) PARAMETER” screen 

 select 

and adjust “PB Level.” 

• Avoid adjusting both outputs at the same time because of the 

delay of the signal path.

6.

Press the PLAY button again.

Playback is paused.

Playing back a song from the title list

1.

Press the USB button below the display 
repeatedly if necessary until the USB (1/3) 
PLAYER page appears. 

2.

Rotate or press Knob 1 to display the title list.

• When you select the line of the folder (

) and press 

Knob 1, the content of the folder appears. 

•  Selecting the line of 

 and pressing Knob 1 moves to 

the upper folder.

NOTE

The title list supports half-size alphabet and numbers only. 
Other characters are converted into “

.”

3.

Rotate Knob 1 to select a song (

e

), and then 

press Knob 1.

Playback starts.

Pausing, fast forwarding, or fast rewind-
ing the playback

Use the buttons in the transport section.

Pausing

Press the PLAY button during playback to pause playback. Press-
ing the PLAY button a second time resumes playback from the 
stopped point. While paused, the indicator flashes.

Fast forwarding/rewinding 

Holding down the REW or FWD button for at least one second 
starts fast forwarding or rewinding while a song is playing. 
Releasing the button resumes normal playback from that point.

Navigating through a song

Press the REW or FWD button to move a song.  

• Pressing the REW button during playback moves to 

the beginning of the current song or moves to the 
beginning of the previous song and starts playback, 
depending on the song playback position.

• Pressing the FWD button during playback moves to 

the beginning of the next song and then starts play-
back.

• Pressing the REW or FWD button while the song is 

stopped or paused moves to the previous or next 
song.

To the upper

folder

Song

Folder

Содержание MGP24X

























































Отзывы: