manualshive.com logo in svg

Yamaha MG166, Руководство пользователя

Поделиться
Скачать
Yamaha MG166 Скачать руководство пользователя страница 24

MG206C-USB/MG166CX-USB/MG166C-USB   Owner’s Manual

Reference

24

Troubleshooting

■

While using the MG mixer

Power doesn’t come on.

❑

Is the supplied power adaptor properly plugged into an appropriate AC wall outlet?

❑

Is the supplied power adaptor properly plugged into the mixer?

No sound.

❑

Are microphones, external devices, and speakers connected correctly?

❑

Are the ON switch and ST switch of the channels you are using turned ON?

❑

Are the channel GAIN controls, Channel fader, STEREO OUT Master fader and
GROUP 1-2/3-4 fader set to appropriate levels?

❑

Are the MONITOR switch and 2TR IN/USB switch set properly?

❑

Are your speaker cables connected properly, or are they shorted?

❑

If the above checks do not identify the problem, call Yamaha for service. (Refer to
the page 71 for a list of service centers.)

Sound is faint, distorted, or 
noisy.

❑

Are the channel GAIN controls, Channel fader, STEREO OUT Master fader and
GROUP 1-2/3-4 fader set to appropriate levels?

❑

Are two different instruments connected to the XLR-type and phone jacks, or to the
phone and RCA pin jacks on one channel? Please connect to only one of these
jacks on each channel.

❑

Is the input signal from the connected device set to an appropriate level?

❑

Are you applying the effects at an appropriate level?

❑

Are microphones connected to the MIC input jacks?

❑

If you are using condenser microphones, is the P48 V switch turned
ON?

No effect is applied. 
(If you are using MG166CX-
USB)

❑

Check that the EFFECT control on each channel is correctly adjusted.

❑

Be sure that the internal effect unit’s ON switch is turned ON.

❑

Be sure that the EFFECT PARAMETER control and EFFECT RTN fader are cor-
rectly adjusted.

I want spoken words to be 
heard more clearly.

❑

Be sure that the 

 switches are ON.

❑

Adjust the equalizers (HIGH, MID and LOW) on each channel.

I want to output a monitor 
signal through speakers.

❑

Connect a powered speaker to the AUX 1, 2 or 3 jack (MG206C-USB), or to the
AUX1 or 2 jack (MG166CX-USB/MG166C-USB) and turn the PRE switch on each
channel on. Then adjust the output signal by using the AUX controls on each chan-
nel and the Master SEND control.

The level meter doesn’t 
show the output signal 
level.

❑

Are the PFL switches for the channels that you are not using turned on?

Содержание MG166






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды