Yamaha MG12XUK, Руководство пользователя

Страница: 14 / 28

Controls and Functions
MG12XUK Owner’s Manual 14
Top panel
Master section (Output:
!5
to
@3
)
!5
[FX SEND] jack
For connecting an external effects unit or a monitor sys-
tem for players. This phone-plug jack outputs the sound
adjusted with the [FX] knob respectively.
!6
[STEREO OUT] jacks
For connecting a powered speaker or amplifier. These
jacks support both XLR and phone plugs.
!7
[PHONES] output jack
For connecting a set of headphones. This jack supports
a stereo phone plug.
!8
[MONITOR OUT] jacks
For connecting a monitor system for operators. These
jacks support phone plugs.
!9
[POWER] LED
Lights when the [ / ] switch on the rear panel is set
to on (pressed to the [ ] position).
@0
Level meter
The L and R meters show the level (volume) of the sig-
nal output from the [STEREO OUT] jacks by seven
steps; “PEAK” (+17), “+10”, “+6”, “0”, “-6”, “-10”, and “-20”
dB. If the “PEAK” lamp continuously lights in red, turn
the [STEREO LEVEL] knob to the left to lower the vol-
ume.
@1
[STEREO MUTE] switch
Turning the switch on ( ) will mute the sound of ste-
reo bus from the output of [MONITOR OUT] jacks or
[PHONES] jack. In this state, when setting the [TO
MON /TO ST ] switch
!2
for channels 11/12 to
[TO MON ], you can hear the sound only from chan-
nels 11/12. For details about the switch, see the “Rear
panel USB section” on page 16.
@2
[MONITOR/PHONES] knob
Adjusts the volume output to the [MONITOR OUT] jacks
and the [PHONES] jack.
@3
[STEREO LEVEL] knob
Adjusts the overall volume output from the [STEREO
OUT] jacks.