Yamaha MD4S Скачать руководство пользователя | Manualshive

Страница: 75 / 115

background image

Editing functions

75

—Owner’s Manual

6. Press the ENTER button to execute the Part Erase operation.

While the data is being erased, the display will indicate “Erase EXE..” and the track record indi-
cator (DIR) for the tracks being erased will light. Part Erase requires one minute to erase each
minute of selected area. While Part Erase is in progress, tracks not being erased will playback.

Copying an entire track to another track (Track Copy)

Track Copy is a function that copies an entire track to another track.

1. Press the EDIT button, use the CURSOR shuttle to make the display read

“Track Copy,” and press the ENTER button.

The display will show the parameters that specify the copy source track and copy destination
track.

The currently selected parameter will blink.

2. Use the CURSOR shuttle and the DATA dial to specify the copy source track

number and copy destination track number.

If either track number parameter shows “*” the Track Copy operation cannot be executed.

3. After you have specified the copy source and copy destination tracks, press

the ENTER button.

The display will ask “COPY EXE?” If you wish to cancel the copy operation, you can press the
EXIT button at this time.

4. Press the ENTER button once again to execute the Track Copy operation.

While the track copy is being executed, the display will indicate “COPY EXE..” and the track
record indicator (DIR) for the copy destination track will light. If you wish to cancel the oper-
ation mid-way through the copy, you can press the STOP button at this time. When the track
copy has been completed, the MD4S will stop.

Note: By pressing the STOP button, you can stop the Part Erase operation mid-way through
its progress. However, in this case, the data between the point at which Part Erase was
executed until the STOP button was pressed will already have been erased.

Note: When you execute the copy operation, any content that had been recorded on the copy
destination track will be erased.

Before Part Erase

After Part Erase

Part Erase

OUT

IN

Copy destination track number

Copy source track number

«
...
73
74
75
76
77
...
»

Содержание MD4S




















































































































Отзывы:

Нет отзывов

Похожие инструкции для MD4S

Бренд: Hagie Страницы: 61

Бренд: JackJaw Страницы: 2

Бренд: Raytheon Страницы: 69

Бренд: Galaxy Audio Страницы: 24

Бренд: Tascam Страницы: 27

Бренд: Jay-Lor Страницы: 72

Бренд: MacDon Страницы: 198

Бренд: M-Triangel Страницы: 6

Бренд: Obdstar Страницы: 42

Бренд: Rane Страницы: 6

Бренд: Rane Страницы: 27

Бренд: Ranger Products Страницы: 6

Бренд: Rane Страницы: 88

Бренд: Haag-Streit Страницы: 21

Бренд: YOKOGAWA Страницы: 75

Littmann Classic II Pediatric

Бренд: 3M Страницы: 53

Бренд: Olympus Страницы: 130

Бренд: SAC Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды