Yamaha MD4S Скачать руководство пользователя | Manualshive

Страница: 57 / 115

background image

Punch-in/out

57

—Owner’s Manual

Rehearsing the auto punch-in/out (single-take)

5. Press the PLAY button, and begin rehearsing the auto punch-in/out.

When you press the PLAY button, the MD4S will automatically locate to the pre-roll point,
and will start playback. When the auto punch-in point is reached, the IN indicator in the dis-
play will disappear, and the monitor signal will switch from the track playback to the record-
ing source. When the auto punch-out point is reached the OUT indicator in the display will
go dark, and the monitor signal will revert to the track playback. (In rehearsal mode, record-
ing will not actually take place during this time.) After the auto-punch out point is passed and
the post-roll is reached, the MD4S will automatically locate to the pre-roll point, and again
enter auto punch-in/out rehearsal-pause mode.

Actually performing the auto punch-in/out (single-take)

6. When stopped or paused, press the REC button.

The REC indicator will blink, the display will indicate “A.Pnch,” and the MD4S will be in auto
punch-in/out record-pause mode.

7. Press the PLAY button to begin the actual auto punch-in/out.

When you press the PLAY button, the MD4S will automatically locate to the pre-roll point,
and begin playback. When you reach the auto punch-in point, the IN indicator of the display
will go dark, and the track selected by the REC SELECT buttons will begin recording (punch-
in). When you reach the auto punch-out point, the OUT indicator of the display will go dark,
recording will end, and playback will resume (punch-out). When the post-roll point is
reached, auto punch-in/out will automatically be defeated, and the MD4S will locate to the
pre-roll point and automatically enter playback-pause mode.

8. Press the PLAY button to hear the recorded result.

Tip: When the display shows “A.Punch Rehe,” you can begin rehearsing the auto punch-in/
out simply by pressing the PLAY button. (It is not necessary to press the REHE button.)

Tip: If you press the REPEAT button while rehearsing auto punch-in/out, the auto punch-
in/out rehearsal will repeat automatically.

Note: In the case of single-take auto punch-in/out, auto punch-in/out will automatically be
canceled when you perform the actual punch-in/out. If you wish to perform auto punch-in/
out once again, you must repeat the procedure from step 1.

Tip: If an optional FC5 foot switch is connected to the PUNCH I/O jack, you can use the
foot switch to perform steps 4 and 6.

«
...
55
56
57
58
59
...
»

Содержание MD4S




















































































































Отзывы:

Нет отзывов

Похожие инструкции для MD4S

Бренд: Tascam Страницы: 27

Бренд: Jay-Lor Страницы: 72

Бренд: MacDon Страницы: 198

Бренд: M-Triangel Страницы: 6

Sportsound SSR-300

Бренд: Daktronics Страницы: 42

Бренд: RayLight Страницы: 34

GAZELLE FREESTYLE

Бренд: Gazelle Страницы: 10

Бренд: Latham Страницы: 19

Бренд: Landoll Страницы: 70

Бренд: Landice Страницы: 19

Бренд: Landice Страницы: 7

Бренд: Maico Страницы: 55

Бренд: Maico Страницы: 38

Бренд: Maico Страницы: 2

Бренд: MAHA Maschinenbau Haldenwang Страницы: 13

Бренд: Parkside Страницы: 95

Бренд: Safety 1st Страницы: 4

Бренд: Safety Engineering Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды