Yamaha MCP1, Руководство по установке

Страница: 10 / 24

10 MCP1 Installation Man u al
Function tree
If yo u long-to u ch (more than t w o seconds) the home s w itch w hen the home page or another
page is displayed, yo u ’ll mo v e to the u tility page. The u tility page contains the follo w ing f u nc-
tion tree.
• LCD Brightness
Adj u sts the b rightness of the display b acklight. Higher n u m b ers increase the b rightness.
• LCD Contrast
Adj u sts the contrast of the display. Higher n u m b ers increase the contrast.
• LED Brightness
Adj u sts the b rightness of the s w itches. Higher n u m b ers increase the b rightness.
• Settings
Mo v es to the settings page.
After synchronizing w ith MTX-MRX Editor, it w ill b e necessary to enter the PIN code.
• IP Setting
Selects either PC or UNIT ID as the method of specifying the MCP1’s IP address.
In the case of PC,
u se MTX-MRX Editor to specify the IP address.
In the case of UNIT ID, the IP address w ill b e 192.168.0.UNIT ID.
After selecting PC or UNIT ID, to u ch the ret u rn s w itch to mo v e to the confirmation
screen and a u tomatically restart.
• Unit ID
Specifies the MCP1’s UNIT ID. The range of this setting is 01 thro u gh FE.
If IP Setting is UNIT ID, make settings so that there is no conflict w ith the IP address of
another de v ice.
After specifying UNIT ID, to u ch the ret u rn s w itch to mo v e to the confirmation screen and
a u tomatically restart.
• Initialize
Initializes the MCP1.
• Version
Display the firm w are v ersion of MCP1.
• Alert
Display the alert n u m b er w hich has occ u rred c u rrent.
LCD Brightness
LCD Contrast
LED Brightness
Settings
IP Setting
Unit ID
Initialize
Version
Alert
Utility page