manualshive.com logo in svg

Yamaha MAJESTY YP250A, Руководство пользователя

Поделиться
Скачать
Yamaha MAJESTY YP250A Скачать руководство пользователя страница 18

3-1

EAU00029

Main switch/steering lock

Main switch/steering lock

The main switch/steering lock con-
trols the ignition and lighting systems,
and is used to lock the steering. The
various positions are described
below.

EAU04580

ON

All electrical circuits are supplied with
power; the meter lighting, taillight,
license plate light and auxiliary light
come on, and the engine can be
started. The key cannot be removed.

EAU00027

INSTRUMENT AND CONTROL FUNCTIONS

3

IGNI

TI

O

N

P

LOCK

ON

OFF

OPEN

PUSH

PUSH

NOTE:

The headlight comes on automatical-
ly when the engine is started and
stays on until the key is turned to
“OFF” or the sidestand is moved
down.

EAU00038

OFF

All electrical systems are off. The key
can be removed.

EAU00040

LOCK

The steering is locked, and all electri-
cal systems are off. The key can be
removed.

To lock the steering

1. Turn the handlebars all the way

to the left.

2. Push the key in from the “OFF”

position, and then turn it to
“LOCK” while still pushing it.

3. Remove the key.

To unlock the steering
Push the key in, and then turn it to
“OFF” while still pushing it.

EW000016

w

Never turn the key to “OFF” or
“LOCK” while the scooter is mov-
ing, otherwise the electrical sys-
tems will be switched off, which
may result in loss of control or an
accident. Make sure that the scoot-
er is stopped before turning the
key to “OFF” or “LOCK”.

5SJ-28199-E1  7/11/02 11:03 AM  Page 16

Содержание MAJESTY YP250A





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды