background image

2

SAFETY INSTRUCTIONS

÷

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
“dangerous voltage” within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert you to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:  TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

1

Read Instructions — All the safety and operating

instructions should be read before the unit is operated.

2

Retain Instructions — The safety and operating

instructions should be retained for future reference.

3

Heed Warnings — All warnings on the unit and in the

operating instructions should be adhered to.

4

Follow Instructions — All operating and other instructions

should be followed.

5

Water and Moisture — The unit should not be used near

water — for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near swimming
pool, etc.

6

Carts and Stands — The unit should be used only with a

cart or stand that is recommended by the manufacturer.

6A

A unit and cart combination

should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the unit and cart
combination to overturn.

7

Wall or Ceiling Mounting — The unit should be mounted

to a wall or ceiling only as recommended by the
manufacturer.

8

Ventilation — The unit should be situated so that its

location or position does not interfere with its proper
ventilation. For example, the unit should not be situated on a
bed, sofa, rug or similar surfaces that may block the
ventilation openings: or placed in a built-in installation, such
as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.

9

Heat — The unit should be situated away from heat

sources such as radiators, stoves, or other units that
produce heat.

10

Power Sources — The unit should be connected to a

power supply only of the type described in the operating
instructions or as marked on the unit.

11

Power-Cord Protection — Power-supply cords should

be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
attention to receptacles, and the point where they exit from
the unit.

12

Cleaning — The unit should be cleaned only as

recommended by the manufacturer.

13

No Use Periods — The power cord of the unit should be

unplugged from the outlet when left unused for a long
period of time.

14

Object and Liquid Entry — Care should be taken so

that objects do not fall into and liquids not spilled into the
inside of the unit.

15

Damage Requiring Service — The unit should be

serviced by qualified service personnel when:

A.

The power-supply cord or the plug has been damaged;
or

B.

Objects have fallen, or liquid has been spilled into the
unit; or

C.

The unit has been exposed to rain; or

D.

The unit does not appear to operate normally or exhibits
a marked change in performance; or

E.

The unit has been dropped, or the cabinet damaged.

16

Servicing — The user should not attempt to service the

unit beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.

17

Power Lines — An outdoor antenna should be located

away from power lines.

18

Grounding or Polarization — The precautions should be

taken so that the grounding or polarization of the unit is not
defeated.

IMPORTANT!

Please record the serial number of this unit in the space
below.

Model:
Serial No.:

The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.

Содержание KPA-502














Отзывы: