5-13
5
EBU18102
Start switch “
”
Push this switch to crank the engine with the start-
er. See the starting instructions on page 7-1 prior
to starting the engine.
EBU34123
Light switch “
/
/OFF”
Set this switch to “
” to turn on the left and right
headlights (low beams) and the taillight. Set the
switch to “
” to turn on the left and right head-
lights (high beams), the handlebar-mounted light
(YFM70KPAN / YFM70KPHN / YFM70KPSN),
and the taillight. Set the switch to “OFF” to turn off
all the lights.
NOTICE
ECB00046
Do not use the headlights with the engine
turned off for an extended period of time. The
battery may discharge to the point that the
starter will not have enough power to crank the
engine. If this should happen, remove the bat-
tery and recharge it. (See page 9-53.)
EBU39181
Winch switch “OUT/IN” (equipped models)
This switch is used when operating the winch
(page 5-27). Read this manual and the Winch
Owner’s Manual completely before operating the
winch switch.
EBU18192
Override switch “OVERRIDE” (YFM70KPAN /
YFM70KPHN / YFM70KPSN)
Top speed is normally limited when operating in
differential gear lock. If conditions require more
engine power when riding forward, push and hold
this switch to override the differential gear lock
speed limiting function. (See page 5-15.) Releas-
ing the switch restores the speed limiting function.
While the override switch is pushed, the segments
of the speedometer digits will appear as shown in
the figure.
UB5K13E0.book Page 13 Thursday, August 19, 2021 2:35 PM
