Yamaha HTR-6063, Руководство по обслуживанию

Страница: 34 / 144

INPUT: AV5 ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
A5-2. 8 CHANNEL INPUT 6 ohms
The audio signal input to MULTI CHANNEL INPUT is output with the speaker impedance “6 ohms” setting.
A5. MULTI CHANNEL INPUT
This menu is used to check the route of audio signal input to MULTI CHANNEL INPUT.
A5-1. 8 CHANNEL INPUT 8 ohms
The audio signal input to MULTI CHANNEL INPUT is output with the speaker impedance “8 ohms” setting.
A 5 - 1
8 c h I n p u t 8 o h m
A 5 - 2
8 c h I n p u t 6 o h m
A 6 - 1
M I C R O U T E
A6. MIC CHECK
A6-1. MIC ROUTE CHECK
The signals input through the YPAO microphone are output to only FRONT L channel via A/D-D/A.
Sub-memu Input level Volume
SPEAKERS OUTPUT SUB-
WOOFER
OUTPUT
FRONT CENTER SURROUND
SURROUND
BACK
PRESENCE/
ZONE2
BI-AMP Both ch, -20 dBm +6.5 dB +13.0 dBm +13.0 dBm +13.0 dBm +13.0 dBm - ∞ -6.5 dBm
ZONE/TONE=MAX Both ch, -20 dBm +6.5 dB +13.0 dBm +13.0 dBm +13.0 dBm - ∞ +13.0 dBm -6.5 dBm
ZONE/TONE=MIN Both ch, -20 dBm +6.5 dB +13.0 dBm +13.0 dBm +13.0 dBm - ∞ +13.0 dBm -6.5 dBm
INVALID ITEM
(Not for service)
Both ch, -20 dBm +6.5 dB – – – – – –
INVALID ITEM
(Not for service)
Both ch, -20 dBm +6.5 dB – – – – – –
D-PARTY MODE Both ch, -20 dBm +6.5 dB +13.0 dBm +13.0 dBm +13.0 dBm - ∞ +13.0 dBm -6.5 dBm
FULL MUTE Both ch, -20 dBm +6.5 dB - ∞ - ∞ - ∞ - ∞ - ∞ - ∞
INVALID ITEM
(Not for service)
Both ch, -20 dBm +6.5 dB – – – – – –
INVALID ITEM
(Not for service)
Both ch, -20 dBm +6.5 dB – – – – – –
34
RX-V667/HTR-6063/RX-A700
RX-V667/HTR-6063/
RX-A70
0