Yamaha HTR-6040 Скачать руководство пользователя

Страница: 75 / 93

Troubleshooting

English

DITIONAL

INFO

ION

■

Remote control

■

Resetting the system

Use this feature to reset all the parameters of this unit to
the initial factory settings.

Press

STANDBY/ON

on the front panel to

set this unit to the standby mode.

Press and hold

TONE CONTROL

and

then press

STANDBY/ON

to turn on this

unit.

The advanced setup menu appears in the front panel
display.

Press

PROGRAM

to select

“PRESET”.

Press

STRAIGHT

repeatedly to select

“RESET”.

Select “CANCEL” to cancel the initialization
procedure without making any changes.

Press

STANDBY/ON

to confirm your

selection and set this unit to the standby
mode.

• This procedure completely resets all the parameters of this unit

including the “SET MENU” parameters. However, the
advanced setup menu parameters will not be initialized.

• The initial factory settings are activated next time you turn on

this unit.

To cancel the initialization procedure at any time without making
any changes, press

STRAIGHT

repeatedly to select

“CANCEL” and then press

STANDBY/ON

Problem

Cause

Remedy

See

page

The remote control
does not work nor
function properly.

Wrong distance or angle.

The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.

Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.

Reposition this unit.

—

The batteries are weak.

Replace all batteries.

The operation mode selector (

) is set

incorrectly.

Set the operation mode selector correctly.
When operating this unit, set it to the

AMP

position.
When operating the component selected by the input
selector button, set it to the

SOURCE

position.

When operating the TV set in the DTV area, set it to
the

position.

—

The remote control code is not correctly
set.

Set the remote control code correctly using “List of
remote control codes” at the end of this manual.

Try setting another code for the same manufacturer
using “List of remote control codes” at the end of this
manual.

Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.

Notes

Содержание HTR-6040






























































































Результаты поиска

Содержание HTR-6040

Отзывы:

Похожие инструкции для HTR-6040

Бренды по названию

Популярные бренды

Yamaha HTR-6040, Руководство пользователя

Результаты поиска

Содержание HTR-6040

Отзывы:

Похожие инструкции для HTR-6040

Бренды по названию

Популярные бренды