background image

23

PLAYBACK

BA

S

IC

 

OPE

R

A

T

IO

N

English

Adjusting the surround parameters of 
PLII MUSIC

1 While playing a source with PLII MUSIC, press 

 / 

 on the remote control to select “PANO” 

(PANORAMA), “DIMEN” (DIMENSION) or “CT 
WID” (CT WIDTH).

2 Press 

 / 

 on the remote control to adjust the 

parameters.

PANO (PANORAMA)

Sends stereo signals to the surround speakers as well as 
the front speakers for a wraparound effect.

Choices:

OFF, ON

Initial setting: OFF

DIMEN (DIMENSION)

Adjusts the surround sound either towards the front or 
towards the rear.

Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)

CT WID (CT WIDTH)

Adjusts the center image from all three front speakers to 
varying degrees. A larger value adjusts the center image 
towards the front left and right speakers.

Control range: 0 (center channel sound is output only from the 

center speaker) to 7 (center channel sound is 
output only from the front left and right speakers)

Initial setting: 3

Enjoying high fidelity stereo sound

Press STEREO on the front panel (or press 
STEREO on the remote control) to select 
“STEREO”.

The sound effects are turned off and no sound is output 
from the center speaker or surround speakers.
Press STEREO on the front panel (or STEREO on the 
remote control) again to turn off the sound effects.

• If you turn off the sound effects while this unit is reproducing 

sound from a Dolby Digital or DTS signal, the dynamic range 
of the signal is automatically compressed and this unit mixes 
the sounds of the center and surround speaker channels and 
outputs them from the front speakers.

• The volume may be greatly reduced when you turn off the 

sound effects. In this case, turn on the sound effects.

Night listening mode

The night listening mode is designed to improve 
listenability at lower volumes or at night.

Press NIGHT on the remote control repeatedly to 
select “NIGHT ON”.

The NIGHT indicator in the front panel display lights up.
Select “NIGHT OFF” to turn off the night listening mode.

• You can use the night listening mode only with the Dolby 

Digital sources.

• If you select the “STEREO” mode or if you connect the 

headphones while multi-channel Dolby Digital source is 
reproduced, the night listening mode is not available.

• The night listening mode may vary in effectiveness depending 

on the input source and surround sound settings you use.

Notes

Notes

STEREO

Front panel

or

STEREO

EFFECT

Remote control

NIGHT

Содержание HTR-5920














































Отзывы: