36
PLAYBACK
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
1
Rotate INPUT to select the input source.
2
Press INPUT MODE to select an input mode.
In most cases, use AUTO.
AUTO
Automatically selects input signals in
the following order:
1) Digital signals
*
2) Analog signals
DTS
Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
ANALOG
Selects only analog signals. If no
analog signals are input, no sound is
output.
* If this unit detects a Dolby Digital or DTS signal, the
decoder automatically switches to the appropriate
decoder.
y
You can adjust the default input mode of this unit (see page 69).
• When playing a DTS-CD/LD, be sure to set INPUT MODE to
DTS.
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player
depending on the player.
■
Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
1
Select the input source.
2
Press AMP to select the AMP mode, then
press STRAIGHT so that “STRAIGHT”
appears in the display.
STRAIGHT
Selecting input modes
INPUT
Front panel
INPUT MODE
CD
PHONO
TUNER
MD/CD-R
DVD
DTV/CBL
V-AUX
VCR1
DVR/VCR2
VOLUME
A
SP
dB
L
R
Input mode
Input source
Front panel
Notes
CD
MD/CD-R
TUNER
V-AUX
DVD
AMP
VCR 1
DVR/VCR2
DTV/CBL
MULTI CH IN
SLEEP
STRAIGHT
ENT.
EFFECT
AMP
then
01EN_HTR-5860_U.book Page 36 Thursday, December 30, 2004 12:27 PM
