background image

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

iii

1 To assure the finest performance, please read this 

manual carefully. Keep it in a safe place for future 
reference.

2 Install this sound system in a well ventilated, cool, 

dry, clean place – away from direct sunlight, heat 
sources, vibration, dust, moisture, and/or cold. 
Allow ventilation space of at least 30 cm on the top, 
20 cm on the left and right, and 20 cm on the back of 
this unit. 

3 Locate this unit away from other electrical 

appliances, motors, or transformers to avoid 
humming sounds.

4 Do not expose this unit to sudden temperature 

changes from cold to hot, and do not locate this unit 
in a environment with high humidity (i.e. a room with 
a humidifier) to prevent condensation inside this 
unit, which may cause an electrical shock, fire, 
damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may 

fall onto this unit and/or this unit may be exposed to 
liquid dripping or splashing. On the top of this unit, 
do not place:
– Other components, as they may cause damage 

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause 

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall 

and liquid may cause electrical shock to the user 
and/or damage to this unit. 

6 Do not cover this unit with a newspaper, tablecloth, 

curtain, etc. in order not to obstruct heat radiation. If 
the temperature inside this unit rises, it may cause 
fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all 

connections are complete.

8 Do not operate this unit upside-down. It may 

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall 

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this 

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. 

Using this unit with a higher voltage than specified 
is dangerous and may cause fire, damage to this 
unit, and/or personal injury. YAMAHA will not be 
held responsible for any damage resulting from use 
of this unit with a voltage other than specified.

13 To prevent damage by lightning, disconnect the 

power cord and outdoor antenna from the wall outlet 
during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact 

qualified YAMAHA service personnel when any 
service is needed. The cabinet should never be 
opened for any reasons.

15 When not planning to use this unit for long periods 

of time (i.e. vacation), disconnect the AC power plug 
from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING”  section 

on common operating errors before concluding that 
this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set 

this unit in the standby mode, and disconnect the 
AC power plug from the wall outlet.

We Want You Listening For A Lifetime 

YAMAHA and the Electronic Industries Association’s Consumer 
Electronics Group want you to get the most out of your equipment 
by playing it at a safe level. One that lets the sound come through 
loud and clear without annoying blaring or distortion – and, most
importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often 
undetectable until it is too late, YAMAHA and the 
Electronic Industries Association’s Consumer 
Electronics Group recommend you to avoid 
prolonged exposure from excessive volume levels.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN 
OR MOISTURE.

This unit is not disconnected from the AC power 
source as long as it is connected to the wall outlet, even 
if this unit itself is turned off. This state is called the 
standby mode. In this state, this unit is designed to 
consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to 
wide slot and fully insert.
This Class B digital apparatus complies with Canadian 
ICES-003.

IMPORTANT

Please record the serial number of this unit in the space 
below.
MODEL: 
Serial No.: 
The serial number is located on the rear of the unit. 
Retain this Owner’s Manual in a safe place for future 
reference.

01EN_HTR-5860_U.book  Page iii  Thursday, December 30, 2004  12:27 PM

Содержание HTR-5860








































































































Отзывы: