5
English
B
ASIC OPERA
TION
AD
V
ANCED OPERA
TION
APPENDIX
INTR
ODUCTION
PREP
ARA
TION
5
VOLUME
Turn this control to turn up or down the volume.
6
6CH INPUT
Press this button to select the source connected to the 6CH
INPUT jacks. The source selected by pressing 6CH INPUT
takes priority over the source selected with INPUT
l
/
h
(or the input selector buttons on the remote control).
7
BASS
Turn this control clockwise to increase or counterclockwise
to decrease the low-frequency response.
8
TREBLE
Turn this control clockwise to increase or counterclockwise
to decrease the high-frequency response.
Note
• If you increase or decrease the high-frequency or the low-
frequency sound to an extreme level, the tonal quality from the
center and rear speakers may not match that of the left and right
main speakers.
9
BALANCE
This control is only effective for the sound from the main
speakers.
Turn the control to adjust the balance of the output volume
from the right and left main speakers to compensate for
sound imbalance caused by the speaker location or listening
room conditions.
0
SPEAKERS A/B
Set A or B (or both A and B) to the ON position for the main
speaker system (connected to this unit) that you want to use.
Set the button(s) to the OFF position for the main speaker
system that you don’t want to use.
q
PROGRAM
l
/
h
Press
l
or
h
to select a DSP program when the effect
speakers (center and rear) are turned on. The name of the
selected program appears on the display.
w
EFFECT
Press this button to turn on or off the effect speakers (center
and rear). If you turn them off, all Dolby Digital and DTS
audio signals except for the LFE channel are directed to the
right and left main speakers. In that case, the output levels
of the right and left speakers may not match.
e
PHONES jack
Connect the headphones to the PHONES jack so that this
unit outputs audio signals for private listening.
When listening with headphones privately, set both
SPEAKERS A/B to the OFF position.
CONTROLS AND FUNCTIONS
r
VIDEO AUX jacks
Connect an auxiliary audio or video input source such as a
game console or camcorder to these jacks. To reproduce
source signals from these jacks, select V-AUX as the input
source.
t
PRESET/TUNING
l
/
h
When “
z
” appears on the display:
This button is used to select a preset station number (1 to 8).
Press
l
to select a lower and
h
to select a higher preset
station number.
When “
z
” goes off from the display:
This button is used for tuning. Press
l
to tune in to lower
frequencies, and
h
to tune in to higher frequencies.
y
A/B/C/D/E
Press this button to select one of 5 preset station groups (A
to E).
u
PRESET/TUNING (EDIT)
Press this button to turn on or off “
z
” on the display and
switch the function between for storing a broadcasting
station (preset tuning) and for tuning. This button is also
used to exchange the assignment of two preset stations with
each other.
i
MEMORY (MAN’L/AUTO FM)
Press this button to store the broadcasting stations. Hold
down this button for more than 3 seconds to begin
automatic preset tuning (for FM stations only).
o
TUNING MODE (AUTO/MAN’L MONO)
Press this button to switch the tuning mode between
automatic and manual. To use the automatic tuning method,
press this button so that the “AUTO” indicator lights up on
the display. To use the manual tuning method, press this
button so that the “AUTO” indicator goes off.
p
FM/AM
Press this button to switch the reception band between FM
and AM.
a
INPUT
l
/
h
Press these buttons to select the input source (DVD, AUX,
MD/CD-R, TUNER, CD, V-AUX, VCR, D-TV/CBL) that
you want to listen to or watch. The name of the selected
input source appears on the display.
0102HTR5450/5440_01-09_EN
3/28/1, 4:47 PM
5
