7. VFD
CHECK
This menu is used to check operation of the FL display.
FL display
7-1. INITIAL DISPLAY
7-2. ALL SEGMENT OFF
7-3. ALL SEGMENT ON
7-4. DIMMER 50 %
7-5. CHECK PATTERN
Segment conditions of the FL driver and the FL tube are checked by turning ON and OFF all segments.
Next, the operation of the FL driver is checked by using the dimmer control.
Then a short between segments next to each other is checked by turning ON and OFF all segments alternately (in lattice).
(In the above example, the segments in the second row from the top are shorted.)
Lighting in lattice
Normal
Short
*
After check, change to next
sub-menu at once.
36
HTR-2064/NS-B20/NS-C20/NS-SWP20
HTR-2064/NS-B20/ NS-C20/NS-SWP20