background image

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE 
PROCEEDING 

Please keep this manual in a safe place for 
future reference.

This product is designed for accurate sound monitoring during 
audio recording, editing, mixing and other applications. Do not 
use for any purpose other than as a speaker. Those who are 
unfamiliar with handling or those who can not handle according to 
this manual, should be supervised by responsible persons to 
ensure safety. 

 WARNING

Always follow the basic precautions listed below to avoid the 
possibility of serious injury or even death from electrical 
shock, short-circuitin

g

, dama

g

es, fire or other hazards. These 

precautions include, but are not limited to, the followin

g

:

If you notice any abnormality

• If any of the following problems occur, immediately turn off the power 

switch and disconnect the electric plug from the outlet.
- The power cord or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped into the product.
- There is a sudden loss of sound during use of the product.
- Cracks or other visible damage appear on the product.
Then have the product inspected or repaired by qualified Yamaha 
service personnel.

Power supply/Power cord 

• Do not place the power cord near heat sources such as heaters or 

radiators, and do not excessively bend or otherwise damage the cord, 
place heavy objects on it, or place it in a position where anyone could 
walk on, trip over, or roll anything over it.

• Only use the voltage specified as correct for the product. The required 

voltage is printed on the name plate of the product.

• Use only the supplied power cord/plug.

If you intend to use the product in an area other than in the one you 
purchased, the included power cord may not be compatible. Please 
check with your Yamaha dealer.

• Check the electric plug periodically and remove any dirt or dust which 

may have accumulated on it.

• Make sure to fully insert the electric plug to prevent electric shocks or 

fire.

• When setting up the product, make sure that the AC outlet you are using 

is easily accessible. If some trouble or malfunction occurs, immediately 
turn off the power switch and disconnect the plug from the outlet. Even 
when the power switch is turned off, as long as the power cord is not 
unplugged from the wall AC outlet, the product will not be disconnected 
from the power source. 

• Remove the electric plug from the outlet when the product is not to be 

used for extended periods of time.

• Do not touch the product or the electric plug during an electrical storm.

• Be sure to connect to an appropriate outlet with a protective grounding 

connection. Improper grounding can result in electrical shock, fire, or 
damage.

Do not open

• This product contains no user-serviceable parts. Do not attempt to 

disassemble the internal parts or modify them in any way. 

Water warnin

g

/Fire warnin

g

• Do not expose the product to rain, use it near water or in damp or wet 

conditions, or place on it any containers (such as vases, bottles or 
glasses) containing liquids which might spill into any openings. 

• Never insert or remove an electric plug with wet hands.

• Do not place any burning items or open flames near the product, since 

they may cause a fire.

Hearin

g

 loss

• Before turning the power of all devices on or off, make sure that all 

volume levels are set to the minimum. Failing to do so may result in 
hearing loss or device damage.

• When turning on the AC power in your audio system, always turn on the 

product LAST, to avoid hearing loss and speaker damage. When turning 
the power off, the product should be turned off FIRST for the same 
reason.

 CAUTION

Always follow the basic precautions listed below to avoid the 
possibility of physical injury to you or others. These 
precautions include, but are not limited to, the followin

g

:

Power supply/Power cord 

• When removing the electric plug from the product or an outlet, always 

hold the plug itself and not the cord. Pulling by the cord can damage it.

Location and connection

• Do not place the product in an unstable position or a location with 

excessive vibration, where it might accidentally fall over and cause injury.

• Keep this product out of reach of children. This product is not suitable for 

use in locations where children are likely to be present.

• When installing the product: 

- Do not cover it with any cloth. 
- Do not install it on a carpet or rug. 
- Make sure the top surface faces up; do not install on its sides or upside 

down. 

- Do not use the product in a confined, poorly-ventilated location. 
Inadequate ventilation can result in overheating, possibly causing 
damage to the product(s), or even fire. Make sure that there is adequate 
space around the product: at least 20cm above, 20cm at the sides and 
20cm behind.

• Do not place the product in a location where it may come into contact 

with corrosive gases or salt air. Doing so may result in malfunction.

• Before moving the product, remove all connected cables.

• Do not press the rear panel of the product against the wall. Doing so may 

cause the plug to come in contact with the wall and detach from the 
power cord, resulting in short circuiting, malfunction, or even fire.

• (HS8I/HS7I/HS5I only)

Always consult qualified Yamaha service personnel and make sure to 
observe the following precautions if the product installation requires 
construction work.
- Choose mounting hardware and an installation location that can 

support the weight of the product.

- Avoid locations that are exposed to constant vibration.
- Use the required tools to install the device.
- Inspect the device periodically.
Improper installation might cause accidents, injuries, damage or 
malfunction of this product.

Maintenance

• Remove the power plug from the AC outlet when cleaning the product.

Handlin

g

 caution

• Do not insert your fingers or hands in any gaps or openings on the 

product (ports).

• Do not rest your weight on the product or place heavy objects on it. 

• Do not operate the product if the sound is distorting. Prolonged use in 

this condition could cause overheating and result in fire.

About disposal

This product contains recyclable components. When disposing of this 
product, please contact the appropriate local authorities.

Yamaha cannot be held responsible for damage caused by improper 
use or modifications to the device.

PA_en_11

Содержание HS series





















Отзывы: