32
Function and operation of components
4. After approximately 1 second, the dis-
play will return to the “Trim Assist” main
menu.
■
Joystick calibration
Joystick calibration need only be carried out
if boat movements do not correspond to joy-
stick movements.
TIP:
• When calibrating the joystick the boat must
be driven on open waters in safe condi-
tions. Avoid calibrating in high winds or
currents that can influence the result of the
calibration.
• Allow the boat to run for a fairly long dis-
tance during the calibration. Hold the joy-
stick firmly in position.
• Calibration does not have to be performed
in both directions, port and starboard, if
only one needs correction.
1. While not in the joystick mode, push and
hold the joystick switch for 5 seconds to
enter the calibration mode.
2. A message will appear in the display.
Release the joystick switch.
3. Move the joystick to STBD. Rotate the
joystick until the boat moves directly to
STBD.
TRIM ASSIST
Engine Speed
%
%
Trim Angle
0KAW_dtp_data_US.book Page 32 Monday, December 17, 2012 3:35 PM
