18
Function and operation of components
The remote control lever(s) must be in for-
ward (F) position before activating speed
control. The active indicator will be illuminat-
ed during operation. Each time the UP side
of the engine RPM switch is pressed the en-
gine speed will gradually increase and press-
ing the DN side of the switch will gradually
decrease speed.
1. Active indicator
2. Speed control switch
3. Engine RPM switch
Pressing the speed control switch will cancel
the speed control mode.
TIP:
When in speed control mode, the PTT
switches (STBD, Center , and PORT) do not
provide PTT function.
■
Station selector switch (for dual sta-
tion)
The station selector switch allows selecting
which station, main or second, will operate
the engines. When selecting a station the re-
mote control levers at both stations must be
in neutral (N). The active indicator will illumi-
nate at the selected station. When the oper-
ating station is changed, “Station activated”
will displayed on the Digital Network Gauge
(6Y9) at the selected station and a single
beep will sound. Changing operating stations
will deactivate any other functions, except
trim assist, that were active at the other sta-
tion.
1. Active indicator
2. Station selector switch
A. Main station helm
B. 2nd station helm
2
1
3
SET
MENU
CANCEL
SET
MENU
CANCEL
SET
MENU
CANCEL
SET
MENU
CANCEL
station
activated
A
B
A
B
2
1
0KAW_dtp_data_US.book Page 18 Monday, December 17, 2012 3:35 PM
