Yamaha GYTR YZF-R6 2022, Руководство по обслуживанию комплекта

Страница: 43 / 76

– 40 –
When decreasing the number of SHIMs (standard setting is three) of slipper clutch setting set,
Further, when decreasing the number of
a
spring (the number of standard setting is three) to
The clutch spring
c
can be either the kit item or the standard item.
engine brake becomes stronger).
(Clutch plate adjustment)
Assembly width adjusted by clutch plate “1” and “2”.
Select the clutch plate from the following table.
Clutch plate “1”
PART No. Thickness
168-16325-00 1.6 mm (0.063 in)
3J2-16324-00 2.0 mm (0.079 in) STD
168-16324-00 2.3 mm (0.091 in)
Clutch plate “2”
PART No. Thickness
3J2-16324-00 2.0 mm (0.079 in) STD
168-16324-00 2.3 mm (0.091 in)
NOTICE
When decreasing the number of
a
spring to two, the caution should be taken to surely
use three pieces of SHIMs for the slipper clutch setting set. If its number being less than
Decreasing the number of
a
spring to one is not allowed.
TIP
When adjusting the clutch assembly width [by replacing the clutch plate(s)], be sure to
replace the clutch plate “1” fast.
plate “2”.