22
C
Drive
Range: 0 – 15
Determines the degree of Analog Overdrive/Distortion in
types 1 – 5, or the degree of Digital Overdrive/Distortion
in types 6 – 11. The higher the value the greater the
distortion. (This parameter is not available in Type 12.)
D
Tone
Range: -7 – 7
Determines the tonal quality of the overall Distortion
sound. Negative values result in a “fatter,” deeper sound,
while positive values make the sound brighter. (This
parameter is not available in Type 12.)
E
Level
Range: 0 – 15
Determines the level of the overall Distortion sound.
(This parameter is not available in Type 12.)
NOTE
■
If the Pre-drive and Drive parameters are both
set to near the maximum, the resulting noise may be so
excessive that even the Noise Gate has no effect in
cleaning up the signal.
HINT
■
The Level parameter should be set to an appro-
priate value to avoid sudden jumps or drops in level when
switching the Distortion block on and off.
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
