manualshive.com logo in svg

Yamaha GRIZZLY YFM70GPAL, Руководство пользователя, Страница: 23 / 182

Поделиться
Скачать
Yamaha GRIZZLY YFM70GPAL Скачать руководство пользователя страница 23

2-11

2

Recommended

Minimum

: FRONT
  REAR
: FRONT
  REAR

: 35 kPa,  (5.0 psi)
: 30 kPa,  (4.4 psi)
: 32 kPa,  (4.6 psi)
: 27 kPa,  (4.0 psi)

Never set tire pressure below minimum. It could cause
the tire to dislodge from the rim.

Cargo or a trailer can affect stability and handling.
Read owner’s manual before loading or towing.
When riding with cargo or towing a trailer : Reduce speed
and allow more room to stop. Avoid hills and rough terrain.
Maximum Vehicle Load : 240 kg, (530 lbs)
Includes weight of operator, cargo and accessories
(and if applicable, trailer tongue weight).

WARNING

B16-F816M-00

YAMAHA

IMPROPER TIRE PRESSURE OR OVERLOADING CAN
CAUSE LOSS OF CONTROL.
LOSS OF CONTROL CAN RESULT IN SEVERE
INJURY OR DEATH.

OPERATING TIRE PRESSURE :

 Set with tires cold

LOADING/TRAILER TOWING

1HP-F2259-21

6  BDE3

5

UBDE60E0.book  Page 11  Monday, April 22, 2019  4:12 PM

Содержание GRIZZLY YFM70GPAL























































































































































































Отзывы:

Нет отзывов