Yamaha GRIZZLY YFM70GPAL Скачать руководство пользователя страница 122

Страница: 122 / 182

9-19

To check the spark plug

1. Check that the porcelain insulator around the

center electrode of the spark plug is a medi-
um-to-light tan (the ideal color when the vehi-
cle is ridden normally).

TIP

If the spark plug shows a distinctly different color,
the engine could be operating improperly. Do not
attempt to diagnose such problems yourself. In-
stead, have a Yamaha dealer check the vehicle.

2. Check the spark plug for electrode erosion

and excessive carbon or other deposits, and
replace it if necessary.

3. Measure the spark plug gap with a wire thick-

ness gauge and, if necessary, adjust the gap
to specification.

To install the spark plug

1. Clean the surface of the spark plug gasket

and its mating surface, and then wipe off any
grime from the spark plug threads.

2. Install the spark plug with the spark plug

wrench, and then tighten it to the specified
torque.

Specified spark plug:

NGK/CPR7EA-9

1. Spark plug gap

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

UBDE60E0.book Page 19 Monday, April 22, 2019 4:12 PM

Содержание GRIZZLY YFM70GPAL























































































































































































Результаты поиска

Содержание GRIZZLY YFM70GPAL

Отзывы:

Yamaha GRIZZLY YFM70GPAL, Руководство пользователя, Страница: 122 / 182

Результаты поиска

Содержание GRIZZLY YFM70GPAL

Отзывы: