Yamaha Grizzly YFM66FAV Скачать руководство пользователя страница 66

Страница: 66 / 198

6-5

Shifting: Neutral to Reverse and Reverse
to Park

NOTE:

The drive select lever cannot be shifted into or
from reverse or park without applying the rear
brake.

1. Bring the ATV to a complete stop and re-

turn the throttle lever to the closed posi-
tion.

2. Apply the brake pedal.
3. Shift from neutral to reverse or from re-

verse to park and vice versa by moving
the drive select lever along the shift
guide.

1. Drive select lever

NOTE:

●

When in reverse, the reverse indicator
light should be on. If the light does not
come on, ask a Yamaha dealer to inspect
the electrical circuit.

●

Due to the synchronizing mechanism in
the engine, the light may not come on un-
til the ATV starts moving.

4. Check behind for people or obstacles,

and then release the brake pedal.

EE.book Page 5 Thursday, March 31, 2005 6:57 PM

Содержание Grizzly YFM66FAV







































































































































































































Результаты поиска

Содержание Grizzly YFM66FAV

Отзывы:

Yamaha Grizzly YFM66FAV, Руководство пользователя, Страница: 66 / 198

Результаты поиска

Содержание Grizzly YFM66FAV

Отзывы: