manualshive.com logo in svg

Yamaha Grizzly YFM66FAV, Руководство пользователя, Страница: 25 / 198

Поделиться
Скачать
Yamaha Grizzly YFM66FAV Скачать руководство пользователя страница 25

4-3

EBU00972

Neutral indicator light “N” 

This indicator light comes on when the drive
select lever is in the “N” position.

EBU00867

Reverse indicator light “R”

This indicator light comes on when the drive
select lever is in the “R” reverse position.

NOTE:

If the indicator light flashes or the speedome-
ter does not show the speed while riding,
have a Yamaha dealer check the speed sen-
sor circuit. 

_

EBU00609

Park indicator light “P”

This indicator light comes on when the drive
select lever is in the “P” (park) position.

EBU11312

Four-wheel-drive indicator “

”/“

” 

This indicator comes on when the “2WD”/
“4WD” switch is set to the “4WD” position. The
differential gear lock indicator “DIFF.LOCK” in
the four-wheel-drive indicator also comes on
when the “LOCK”-“4WD” switch is set to the
“4WD-LOCK” position.

NOTE:

_ 

Due to the synchronizing mechanism in the
differential gear case, the four-wheel drive in-
dicator may not come on until the ATV starts
moving. 

_ 

DIFF.

LOCK

EE.book  Page 3  Thursday, March 31, 2005  6:57 PM

Содержание Grizzly YFM66FAV







































































































































































































Отзывы:

Нет отзывов