Yamaha Grizzly 700 2011 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 172

Yamaha Grizzly 700 2011 Скачать руководство пользователя страница 38

4-11

4

control and have an accident if you cannot
make a sharp enough turn for the speed you
are traveling.

This ATV is equipped with a switch allowing you to
lock the differential gear when in four-wheel drive.
Select the appropriate switch position according to
the terrain and the conditions.

●

“4WD” (four-wheel drive): Power is supplied to
the rear and front wheels.

●

“LOCK” (four-wheel drive with the differential
gear locked): Power is supplied to the rear and
front wheels and the differential gear is locked.
Unlike in four-wheel drive, all wheels turn at the
same speed.

To lock the differential gear in four-wheel drive,
make sure the On-Command four-wheel-drive
switch is pushed in to the “4WD” position.

1. On-Command four-wheel-drive switch “2WD”/“4WD”

2. On-Command differential gear lock switch “4WD”/“LOCK”

2WD

4WD

1

2

U1HP60E0.book Page 11 Monday, April 11, 2011 7:56 PM

«
...
36
37
38
39
40
...
»

Содержание Grizzly 700 2011













































































































































































Отзывы:

Нет отзывов