manualshive.com logo in svg

Yamaha Grizzly 700 2011, Руководство пользователя, Страница: 16 / 172

Поделиться
Скачать
Yamaha Grizzly 700 2011 Скачать руководство пользователя страница 16

1-6

1

**.* kPa
*.** kgf/cm²

*.* psi

**.* kPa
*.** kgf/cm²

*.* psi

NEVER use with drugs or alcohol.

NEVER store fuel or flammable liquids.

This unit contains high-pressure nitrogen 
gas.
Mishandling can cause an explosion. Do not 
incinerate, puncture or open.

Use unleaded gasoline only.

Measure the tire pressure when the tires are 
cold.

Adjust the tire pressure.
Improper tire pressure can cause loss of 
control.
Loss of control can result in severe injury or 
death.

Turning the ATV in 4WD-LOCK 
(“DIFF.LOCK”) takes more effort.
Operate at a slow speed and allow extra 
time and distance for maneuvers to avoid 
loss of control.

This pictogram shows the loading limits 
and/or maximum load capacity for this ATV.
Follow all load limits and other loading 
guidelines in this manual.
Load may include the driver, passenger, 
human protective gear, accessories, goods, 
luggage, and all other load related items.
Make sure you do not exceed the load limits.
Overloading can cause loss of control.
Loss of control can result in severe injury or 
death.

U1HP60E0.book  Page 6  Monday, April 11, 2011  7:56 PM

Содержание Grizzly 700 2011













































































































































































Отзывы:

Нет отзывов