5-1
5
EBU19200
PRE-OPERATION CHECKS
EBU19223
Pre-operation check list
Before operating this ATV, be sure to check the items listed in the following table.
WARNING
EWB00480
Always inspect your ATV each time you use it to make sure it is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in the Owner’s
Manual. Failure to inspect increases the possibility of an accident or equipment damage.
TIP
The maintenance of some items in the table has to be performed by a Yamaha dealer. Refer to the periodic
maintenance charts on page 8-3 to determine which service should be performed by a Yamaha dealer.
ITEM
ROUTINE
PAGE
Fuel
• Check fuel level in fuel tank, and add recommended fuel if neces-
sary.
• Check fuel line for leakage. Correct if necessary.
Engine oil
• Check oil level in engine, and add recommended oil to specified lev-
el if necessary.
• Check ATV for oil leakage. Correct if necessary.
Final gear oil
• Check ATV for oil leakage. Correct if necessary.
Front brake
• Check operation. If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
• Check brake pads for wear, and replace if necessary.
• Check brake fluid level in reservoir, and add recommended brake
fluid to specified level if necessary.
• Check hydraulic system for leakage. Correct if necessary.
U5WH65E0.book Page 1 Thursday, June 12, 2008 11:39 AM
Содержание GRIZZLY 350 YFM35GY
