8-12
8
TIP
The engine oil should be between the tip of the
dipstick and the maximum level mark.
5. If the engine oil is not between the tip of the
dipstick and the maximum level mark, add
sufficient oil of the recommended type to
raise it to the correct level.
NOTICE:
Be sure
the engine oil is at the correct level, other-
wise engine damage may result.
[ECB00852]
6. Insert the dipstick into the oil filler hole, and
then tighten the engine oil filler cap.
To change the engine oil (with or without oil fil-
ter cartridge replacement)
1. Place the ATV on a level surface.
2. Start the engine, warm it up for several minu-
tes, and then turn it off.
3. Place an oil pan under the engine to collect
the used oil.
4. Remove the engine oil filler cap, and then re-
move the engine oil drain bolt and its gasket
to drain the oil from the crankcase.
1. Engine oil dipstick
2. Maximum level mark
3. Tip of the engine oil dipstick
1. Engine oil drain bolt
2. Gasket
1
2
U1NS64E0.book Page 12 Thursday, June 25, 2015 8:36 AM
Содержание GRIZZLY 350 YFM35GDXG
