Yamaha GRIZZLY 350 YFM35GDXG, Руководство пользователя

Страница: 32 / 146

4-5
4
EBU18065
Handlebar switches
EBU18081
Engine stop switch “ / ”
Set this switch to “ ” before starting the engine.
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to “
”.
EBU18102
Start switch “ ”
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
EBU18164
Light switch “ / /OFF”
Set this switch to “ ” to turn on the low beams,
the taillight and the meter lighting. Set the switch
to “
” to turn on the high beams, the taillight
and the meter lighting. Set the switch to “OFF” to
turn off all the lights.
NOTICE
ECB00044
Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and
recharge it. (See page 8-39.)
EBU18171
Horn switch “ ”
Press the switch to sound the horn.
1. Light switch “ / /OFF”
2. Engine stop switch “ / ”
3. Start switch “ ”
4. Horn switch “ ”
U1NS64E0.book Page 5 Thursday, June 25, 2015 8:36 AM