manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM350AZ, Руководство пользователя

Поделиться
Скачать
Yamaha GRIZZLY 350 YFM350AZ Скачать руководство пользователя страница 15

1-5

1

**.* kPa
*.** kgf/cm²

*.* psi

**.* kPa
*.** kgf/cm²

*.* psi

NEVER use with drugs or alcohol.

NEVER store fuel or flammable liquids.

This unit contains high-pressure nitrogen 
gas.
Mishandling can cause explosion. Do not 
incinerate, puncture or open.

Use unleaded gasoline only.

Measure tire pressure when tires are cold.

Adjust tire pressure.
Improper tire pressure can cause loss of 
control.
Loss of control can result in severe injury or 
death.

Turning the ATV in 4WD-LOCK 
(“DIFF.LOCK”) takes more effort.
Operate at a slow speed and allow extra 
time and distance for maneuvers to avoid 
loss of control.

This pictogram shows the loading limits 
and/or maximum load capacity for this ATV.
Follow all load limits and other loading 
guidelines in this manual.
Load may include the driver, passenger, 
human protective gear, accessories, goods, 
luggage, and all other load related items.
Make sure you do not exceed the load limits.
Overloading can cause loss of control.
Loss of control can result in severe injury or 
death.

U5WH66E0.book  Page 5  Thursday, June 18, 2009  10:41 AM

Содержание GRIZZLY 350 YFM350AZ











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды