manualshive.com logo in svg

Yamaha GRIZZLY 125 YFM125GY, Руководство пользователя, Страница: 91 / 130

Поделиться
Скачать
Yamaha GRIZZLY 125 YFM125GY Скачать руководство пользователя страница 91

 

8-23

 

1

2

3

4

5

6

7

8

9

10

11

TIP

 

The engine is warm when it quickly responds to the

 

throttle.

2. Attach the tachometer to the spark plug lead.
3. Check the engine idling speed and, if neces-

sary, adjust it to specification by turning the
throttle stop screw at the carburetor. To in-
crease the engine idling speed, turn the throt-
tle stop screw in direction (a), and to decrease
it, turn the screw in direction (b).

TIP

 

If the specified idling speed cannot be obtained as
described above, have a Yamaha dealer make the

 

adjustment.

 

EBU24044

 

Adjusting the throttle cable free play 

 

The throttle cable free play should be checked
and, if necessary, adjusted at the intervals speci-
fied in the periodic maintenance and lubrication
chart.
The throttle cable free play should measure 1.0–
3.0 mm (0.04–0.12 in) at the throttle lever. Period-
ically check the throttle cable free play and, if nec-
essary, adjust it as follows.

TIP

 

The engine idling speed must be checked, and ad-
justed if necessary, before adjusting the throttle ca-

 

ble free play.

1. Loosen the locknut.
2. To increase the throttle cable free play, turn

the throttle cable free play adjusting bolt in di-
rection (a). To decrease the throttle cable free
play, turn the adjusting bolt in direction (b).

 

1.  Throttle stop screw

 

Engine idling speed:

1650–1750 r/min

(a)

(b)

1

Содержание GRIZZLY 125 YFM125GY



































































































































Отзывы:

Нет отзывов