manualshive.com logo in svg

Yamaha GRIZZLY 125 YFM125GY, Руководство пользователя

Поделиться
Скачать
Yamaha GRIZZLY 125 YFM125GY Скачать руководство пользователя страница 35

 

5-3

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU19540

 

Fuel 

 

Make sure that there is sufficient fuel in the tank.
(See page 4-6.)

WARNING

 

EWB00520 

 

●

 

Do not overfill the fuel tank. Fuel expands
when it heats up. If the fuel tank is overfilled,
fuel could spill out due to heat from the en-
gine or the sun.

 

●

 

Be careful not to spill fuel, especially on the
engine or exhaust pipe which can cause a
fire and severe injury. Wipe up any spilled
fuel immediately.

 

●

 

Do not refuel right after the engine has been
running and is still very hot.

 

●

 

Be sure the fuel tank cap is closed securely.

 

EBU19560

 

Engine oil 

 

Make sure that the engine oil is at the specified lev-
el. Add oil as necessary. (See page 8-9.)

 

EBU19580

 

Transmission oil 

 

Make sure that the transmission oil is at the speci-
fied level. Add oil as necessary. (See page 8-12.)

 

EBU19650

 

Front and rear brakes 

 

Brake levers

 

●

 

Check for correct free play in the brake levers. If
the free play is incorrect, adjust it. (See pages
8-25 and 8-30.)

 

●

 

Check operation of the levers. They should
move smoothly and there should be a firm feel-
ing when the brake is applied. If not, have the
ATV checked by a Yamaha dealer.

 

Brake operation

 

Test the brakes at slow speed after starting out to
make sure they are working properly. If the brakes
do not provide proper braking performance, check
the brakes for wear. (See page 8-24.)

WARNING

 

EWB00570 

 

Always check the brakes at the start of every
ride. Do not ride the ATV if you find any prob-
lem with the brakes or you could lose braking
ability, which could lead to an accident. If a
problem cannot be corrected by the adjust-
ment procedures provided in this manual, have

 

the ATV checked by a Yamaha dealer.

Содержание GRIZZLY 125 YFM125GY



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды