Yamaha FZ8-N Скачать руководство пользователя страница 92

Страница: 92 / 108

PERIODIC MAINTENANCE AND ADJUSTMENT

6-42

EAU44801

Rear wheel (for non-ABS mod-
els)

WARNING

EWA14840

For the ABS model, have a Yamaha
dealer remove and install the wheel.

EAU25314

To remove the rear wheel

WARNING

EWA10821

To avoid injury, securely support the
vehicle so there is no danger of it
falling over.

1. Loosen the axle nut.

2. Lift the rear wheel off the ground

according to the procedure on
page 6-39.

3. Remove the axle nut.
4. Fully loosen the locknut on each

side of the swingarm.

5. Turn the drive chain slack adjust-

ing bolts fully in direction (a) and
push the wheel forward.

6. Remove the drive chain from the

rear sprocket.

TIP

●

If the drive chain is difficult to re-
move, remove the wheel axle first,
and then lift the wheel upward
enough to remove the drive chain
from the rear sprocket.

●

The drive chain cannot be disas-
sembled.

7. While supporting the brake caliper

bracket, pull the wheel axle out,
and then remove the wheel.

NOTICE:

Do not apply the brake

after the wheel has been re-
moved together with the brake
disc, otherwise the brake pads
will be forced shut.

[ECA11071]

1. Axle nut

1. Drive chain slack adjusting bolt
2. Locknut

(a)

1. Wheel axle

U39PE2E0.book Page 42 Thursday, November 8, 2012 9:24 AM

Содержание FZ8-N













































































































Результаты поиска

Содержание FZ8-N

Отзывы:

Похожие инструкции для FZ8-N

Бренды по названию

Популярные бренды

Yamaha FZ8-N, Руководство пользователя

Результаты поиска

Содержание FZ8-N

Отзывы:

Похожие инструкции для FZ8-N

Бренды по названию

Популярные бренды