Yamaha FZ6-SA Скачать руководство пользователя страница 31

Страница: 31 / 92

INSTRUMENT AND CONTROL FUNCTIONS

3-17

●

Do not exceed the maximum
load of 185 kg (408 lb) for the ve-
hicle.

EAU36462

Adjusting the shock absorber
assembly

This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.

CAUTION:

ECA10100

Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.

Adjust the spring preload as follows.

1. Remove the seat. (See page

3-16.)

2. To increase the spring preload and

thereby harden the suspension,
turn the adjusting ring in direction
(a). To decrease the spring pre-
load and thereby soften the sus-
pension, turn the adjusting ring in
direction (b).

NOTE:

●

Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.

●

Use the special wrench included in
the owner’s tool kit to make the ad-
justment.

1. Spring preload adjusting ring
2. Special wrench

3. Position indicator

Spring preload setting:

Minimum (soft):

Standard:

Maximum (hard):

U4P5E0E0.book Page 17 Wednesday, December 14, 2005 11:15 AM

Содержание FZ6-SA





























































































Результаты поиска

Содержание FZ6-SA

Отзывы:

Yamaha FZ6-SA, Руководство пользователя, Страница: 31 / 92

Результаты поиска

Содержание FZ6-SA

Отзывы: