Yamaha FZ6-S 2004, Руководство по обслуживанию

Страница: 45 / 456

2-19
Yamaha bond
No.1215
Use a lock
washer
Use a lock
washer
Left thread
NOTE 1:
TIGHTENING TORQUES
SPEC
NOTE 2:
Item Fastener
Thread
Q’ty
Tightening torque
Remarks Item Fastener
size
Q ty
Nm m
S
kg ft
S
lb
Remarks
Crankcase (main journal) Bolt M8 10 See NOTE 2
Crankcase Bolt M6 2 14 1.4 1.0
Crankcase Bolt M6 13 12 1.2 8.7
Crankcase Bolt M8 2 24 2.4 17
Generator rotor cover Bolt M6 9 12 1.2 8.7
Clutch cover Bolt M6 7 12 1.2 8.7
Clutch cover Bolt M6 1 12 1.2 8.7
Pickup coil rotor cover Bolt M6 7 12 1.2 8.7
Clutch cable holder Bolt M6 2 12 1.2 8.7
Pickup coil rotor cover Bolt M8 1 15 1.5 11
Shift shaft cover Bolt M6 6 12 1.2 8.7
Breather plate Screw M6 3 12 1.2 8.7
Stator coil Screw M6 3 10 1.0 7.2
Pickup rotor cover and clamp Screw M6 1 7.0 0.7 5.1
Drive sprocket cover Bolt M6 3 10 1.0 7.2
Oil gallery bolt – M16 2 8 0.8 5.8
Generator rotor cover and
stator coil lead clamp Screw M6 1 10 1.0 7.2
Breather hose cover Bolt M6 4 12 1.2 8.7
Oil pipe Bolt M6 2 12 1.2 8.7
Crankshaft position sensor Bolt M6 2 10 1.0 7.2
Starter clutch Screw M8 3 32 3.2 23
Starter motor cover bolt Bolt M6 2 3.4 0.34 2.5
Clutch pressure plate Screw M6 6 8.0 0.8 5.8
Clutch boss Nut M20 1 90 9.0 65
Drive sprocket Nut M18 1 90 9.0 65
Transmission bearing housing Screw M6 3 12 1.2 8.7
Shift drum retainer Bolt M6 2 10 1.0 7.2
Shift shaft spring stopper Screw M8 1 22 2.2 16
Shift rod Nut M6 1 7 0.7 5.1
Shift rod Nut M6 1 7 0.7 5.1
Shift rod joint Bolt M6 1 10 1.0 7.2
Shift arm Bolt M6 1 10 1.0 7.2
Pickup coil rotor Bolt M8 1 35 3.5 25
Starter motor Bolt M6 2 10 1.0 7.2
Neutral switch – M10 1 20 2.0 14
Oil level switch Bolt M6 2 10 1.0 7.2
Speed sensor Bolt M6 1 10 1.0 7.2
Retighten the bolt at 1000 km (600 ml).
1. First, tighten the bolts to approximately 12 Nm (1.2 m
S
kg, 8.7 ft
S
lb) with a torque wrench.
(Following the tightening order)
2. Retighten the bolts 25 Nm (2.5 m
S
kg, 18 ft
S
lb) with a torque wrench.
3. Loosen the all bolts one by one following the tightening order and then tighten them to 27 Nm (2.7
m
S
kg, 20 ft
S
lb) again.