Yamaha FZ6-S 2004, Руководство по обслуживанию

Страница: 435 / 456

8-57
IMMOBILIZER SYSTEM
ELEC
<Example> 52
Light ON
Light OFF
SELF-DIAGNOSIS ERROR CODE INDICATION
When the system failure occurred, the error code number is indicated in the LCD display of meter and
the immobilizer indicator light flashes at the same time. The pattern of flashing also shows the error
code.
Error code Detection Symptoms Trouble Measures
51 Immobilizer Cannot transmit code be-
tween the key and immobiliz-
er unit. 1) Objects that may keep off radio
waves exist around the keys and
antennas.
2) Immobilizer unit failure
3) Key failure
1) Keep clear of magnets, metals
and other keys from the sur-
roundings of keys and antennas.
2) Replace the immobilizer unit.
3) Replace the key.
52 Immobilizer Codes do not match between
the key and immobilizer unit. 1) Disturbed by other transponder.
Failed to verify continually for ten
times.
2) Unregistered standard key was
used.
1) Place the immobilizer unit away
more than 50 mm from the trans-
ponder of other vehicle.
2) Register the standard key.
53 Immobilizer Cannot transmit code be-
tween the ECU and immobi-
lizer unit. Noise interference or disconnected
lead / cable.
1) Obstruction due to radio wave
noise.
2) Error by disconnection of the
communication harness.
3) Immobilizer unit failure.
4) ECU failure.
1) Check the wire harness and con-
nector.
2) Replace the immobilizer unit.
3) Replace the ECU.
54 Immobilizer Codes do not match between
ECU and immobilizer unit. Noise interference or disconnected
lead / cable.
1) Obstruction due to radio wave
noise.
2) Error by disconnection of the
communication harness.
3) Immobilizer unit failure
4) ECU failure
(When the used parts from other
vehicles are used, the code re-
registering key ID is not regis-
tered to the ECU.)
1) Register the code re-registering
key ID.
2) Check the wire harness and con-
nector.
3) Replace the immobilizer unit.
4) Replace the ECU.
55 Immobilizer Key code registration error. Same standard key was attempted
to continuously two times register. Prepare the new standard key and
register it.
56 ECU Undefinition code is re-
ceived. Noise interference or disconnected
lead / cable.
1) Obstruction due to radio wave
noise.
2) Error by disconnection of the
communication harness.
3) Immobilizer unit failure.
4) ECU failure.
1) Check the wire harness and con-
nector.
2) Replace the immobilizer unit.
3) Replace the ECU.
Immobilizer warning light code indication
Digit of 10 : Cycles of 1 sec. “ON” and 1.5 sec. “OFF”.
Digit of 1 : Cycles of 0.5 sec. “ON” and 0.5 sec. “OFF”.