Yamaha FZ1-NW Скачать руководство пользователя страница 48

Страница: 48 / 98

PERIODIC MAINTENANCE AND MINOR REPAIR

6-2

EAU17706

Periodic maintenance and lubrication chart

NOTE:

●

The annual checks must be performed every year, except if a kilometer-based maintenance is performed in-
stead.

●

From 50000 km, repeat the maintenance intervals starting from 10000 km.

●

Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical
skills.

NO.

ITEM

CHECK OR MAINTENANCE JOB

ODOMETER READING (

1000 km)

ANNUAL

CHECK

Fuel line

• Check fuel hoses for cracks or damage.

√

Spark plugs

• Check condition.
• Clean and regap.

√

• Replace.

√

Valves

• Check valve clearance.
• Adjust.

Every 40000 km

Air filter element

• Replace.

√

Clutch

• Check operation.
• Adjust.

√

Front brake

• Check operation, fluid level and vehicle for fluid leakage.

√

• Replace brake pads.

Whenever worn to the limit

Rear brake

• Check operation, fluid level and vehicle for fluid leakage.

√

• Replace brake pads.

Whenever worn to the limit

Brake hoses

• Check for cracks or damage.

√

• Replace.

Every 4 years

Wheels

• Check runout and for damage.

√

U2D121E0.book Page 2 Tuesday, September 19, 2006 1:30 PM

ProCarManuals.com

Содержание FZ1-NW



































































































Результаты поиска

Содержание FZ1-NW

Отзывы:

Yamaha FZ1-NW, Руководство пользователя, Страница: 48 / 98

Результаты поиска

Содержание FZ1-NW

Отзывы: