Yamaha FX Nytro FX10MTRY Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 92

background image

Periodic maintenance and adjustment

63

If excessive free play is felt, consult a Yamaha
dealer.

ESU12173

Drive track and slide runners

Drive track

WARNING

EWS00480

A broken track, track fittings or debris
thrown by the drive track could be danger-
ous to an operator or bystanders. Observe
the following precautions:

●

Do not allow anyone to stand behind the
snowmobile when the engine is running.

●

When the rear of the snowmobile is
raised to allow the drive track to spin, a
suitable stand must be used to support
the rear of the snowmobile. Never allow
anyone to hold the rear of the snowmo-
bile off the ground to allow the drive
track to spin. Never allow anyone near a
rotating drive track.

●

Inspect the drive track condition fre-
quently. Replace damaged slide metal.
Replace the drive track if it is damaged
to the depth where fabric reinforcement
material is visible or support rods are
broken. Otherwise, track damage or fail-
ure could result in loss of braking ability
and snowmobile control, which could
cause an accident.

Checking the drive track

WARNING

EWS00490

Do not operate the snowmobile if you find
damage to the drive track, or if it has been
maladjusted. Drive track damage or failure
could result in loss of braking ability and
snowmobile control, which could cause
an accident.

Check the drive track for deflection, wear, and
damage.

Adjust or replace if necessary. (See the fol-
lowing section for more details.)

Measuring the drive track deflection
1.

Lay the snowmobile on its side.

2.

Measure the drive track deflection with a
spring scale. Pull at the center of the drive
track with a force of 100 N (10 kgf, 22 lbf).

TIP

Measure the gap between the slide runner
and the edge of the track window. Measure
both sides.

1. Spring scale

U8GL11E0.book Page 63 Friday, June 20, 2008 6:51 PM

«
...
67
68
69
70
71
...
»

Содержание FX Nytro FX10MTRY





























































































Отзывы:

Нет отзывов

Похожие инструкции для FX Nytro FX10MTRY

Бренд: J&M Страницы: 26

Raider Extreme 1100D

Бренд: Dazon Страницы: 85

Бренд: Baja motorsports Страницы: 18

MAVERICK Trail 2021 Series

Бренд: Can-Am Страницы: 195

Бренд: Primo Water Страницы: 12

Бренд: Strongway Страницы: 15

Бренд: Panther Страницы: 16

Бренд: Duralite Страницы: 27

Бренд: BMS Страницы: 158

Бренд: Krone Страницы: 128

Бренд: Krone Страницы: 192

Sportsman 9921169

Бренд: Polaris Страницы: 137

Бренд: Yamaha Страницы: 32

Бренд: KAYO MOTOR Страницы: 106

Бренд: PARKIT360 Страницы: 7

Бренд: Access Motor Страницы: 59

Бренд: Ezgo Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды