Yamaha FX Nytro FX10MTRY Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 92

background image

Operation

37

●

Always check the drive track for damage
or maladjustment before operating the
snowmobile.

●

Do not operate the snowmobile if you
find damage to the drive track.

NOTICE

ECS00350

Ride on fresh snow frequently. Operating
on ice or hard-packed snow will rapidly
wear the slide runners.

ESU11350

Maximizing drive track life

Recommendations
Track tension

During initial break-in, the new drive track will
tend to stretch quickly as the track settles. Be
sure to correct the track tension and align-
ment frequently. (See page 63 for adjustment
procedures.) A loose track can slip (ratchet),
derail or catch on suspension parts causing
severe damage. Do not overtighten the drive
track, otherwise it may increase the friction
between the track and the slide runners, re-
sulting in the rapid wear of both components.
Also, this may put an excessive load on the
suspension components, resulting in compo-
nent failure.

Marginal snow

The drive track and the slide runners are lubri-
cated and cooled by snow and water. To pre-
vent the drive track and slide runners from
overheating, avoid sustained high-speed us-
age in areas such as icy trails, frozen lakes
and rivers that have minimal snow coverage.
An overheated track will be weakened inter-
nally, which may cause failure or damage.

Off-trail riding

Avoid off-trail riding until there is sufficient
snow coverage. It generally takes several feet
of snow to provide a good overall base to
properly cover debris, such as rocks, logs,

etc. If snow coverage is not sufficient, stay on
trails to avoid impact damage to the drive
track.

Studded track

In general, track life will be shortened when
studs are installed. Drilling stud holes into the
drive track will cut the internal fibers, which
weakens the track. Avoid spinning the drive
track. Studs may catch on an object and pull
out of the track, leaving tears and damage
around the already weakened area. To mini-
mize possible damage, consult your stud
manufacturer for installation and stud pattern
recommendations.

Yamaha does not recommend track stud-
ding.

ESU11360

Strap (FX10MTR)

The strap should be used only by experienced
operators to assist them when traverse (side-
hill) riding.

WARNING

EWS00290

Improper use of the strap on the handlebar
can result in severe injury or death.

●

Use the strap only as an operator grip
point when needed to shift weight uphill
to maintain balance during traverse
(side-hill) riding. Only experienced oper-
ators should traverse slopes steep
enough to require strap use.

1. Strap

U8GL11E0.book Page 37 Friday, June 20, 2008 6:51 PM

«
...
41
42
43
44
45
...
»

Содержание FX Nytro FX10MTRY





























































































Отзывы:

Нет отзывов

Похожие инструкции для FX Nytro FX10MTRY

Бренд: ODES Страницы: 92

Бренд: ODES Страницы: 136

Бренд: GEDA Страницы: 36

ATV8E - SERVICE

Бренд: Eton Страницы: 34

Бренд: Suzuki Страницы: 111

Бренд: Aosom Страницы: 5

Beast 1000 Series

Бренд: BMS Страницы: 114

Бренд: Yamaha Страницы: 32

Бренд: Yamaha Страницы: 42

Бренд: Yamaha Страницы: 130

Бренд: Yamaha Страницы: 136

Бренд: Yamaha Страницы: 132

YFB250K Timberwolf

Бренд: Yamaha Страницы: 159

Бренд: Yamaha Страницы: 214

Бренд: Trail Rover Страницы: 34

Ranger 500 2x4 2007

Бренд: Polaris Страницы: 345

Sportsman 700 HO 2004

Бренд: Polaris Страницы: 139

Бренд: Yamaha Страницы: 138

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды