Yamaha FL200C, Руководство пользователя

Страница: 48 / 100

Operation
42
EMU36463
Controls

Turn the steering wheel full-right and full-
left. Make sure operation is smooth and un-
restricted throughout the whole range with
no binding or excessive free play.

Operate the throttle levers several times to
make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.

Look for loose or damaged connections of
the throttle and shift cables.
EMU36484
Engine shut-off cord (lanyard)
Inspect the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
EMU40994
Engine oil
1. Place the outboard motor in a vertical
position (not tilted).
NOTICE:
If the out-
board motor is not level, the oil level
indicated on the oil dipstick may not
be accurate.
[ECM01862]
2. Remove the oil dipstick and wipe it
clean.
3. Insert the oil dipstick completely and re-
move it again.
4. Check that the oil level on the oil dipstick
is between the upper and lower marks.
Consult your Yamaha dealer if the oil lev-
el is not at the proper level or if it appears
milky or dirty.
EMU27154
Engine

Check the engine and engine mounting.

Look for loose or damaged fasteners.

Check the propeller for damage.

Check for engine oil leaks.
EMU36494
Flushing device
Check that the flushing device’s garden hose
connector is securely screwed on to the fit-
ting on the bottom cowling.
NOTICE:
If the
1. Clip
2. Engine shut-off cord (lanyard)
ZMU06873
1
2
1. Oil dipstick
1. Oil dipstick
2. Lower mark
3. Upper mark
ZMU05972
1
1
3
2
ZMU07057
U6P27AE0.book Page 42 Friday, December 6, 2013 6:17 PM