INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
Clock mode
To set the clock:
1. Push the “SELECT” button and
“RESET” button together for at
least two seconds.
2. When the hour digits start flashing,
push the “RESET” button to set the
hours.
3. Push the “SELECT” button, and
the minute digits will start flashing.
4. Push the “RESET” button to set
the minutes.
5. Push the “SELECT” button and
then release it to start the clock.
EAU12341
Handlebar switches
Left
Right
EAU12400
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
EAU12460
Turn signal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
1. Windshield position adjusting switch “
”
2. Dimmer switch “
/
”
3. Turn signal switch “
/
”
4. Horn switch “
”
1. Engine stop switch “
/
”
2. Start switch “
”
5JW11.book Page 5 Friday, May 9, 2003 4:03 PM
