Yamaha FJR1300APX, Руководство пользователя

Страница: 25 / 102

INSTRUMENT AND CONTROL FUNCTIONS
3-9
3
Ambient temperature, instanta-
neous fuel consumption and aver-
age fuel consumption modes
Push the “RESET” button to switch the
display between the ambient tempera-
ture mode “Air”, the instantaneous fuel
consumption mode “km/L” or “L/100
km” and the average fuel consumption
mode “AV_ _._ km/L” or “AV_ _._ L/100
km” in the following order:
Air
→
km/L or L/100 km
→
AV_ _._
km/L or AV_ _._ L/100 km
→
Air
Ambient temperature mode
This display shows the ambient tem-
perature from –9 °C to 50 °C in 1 °C in-
crements. The temperature displayed
may vary from the ambient tempera-
ture.
NOTE:
●
If the ambient temperature falls be-
low –9 °C, a lower temperature
than –9 °C will not be displayed.
●
If the ambient temperature climbs
above 50 °C, a higher temperature
than 50 °C will not be displayed.
● The accuracy of the temperature
reading may be affected when
riding slowly (approximately under
20 km/h) or when stopped at traffic
signals, railroad crossings, etc.
Instantaneous fuel consumption mode
The instantaneous fuel consumption
display can be set to either “km/L” or
“L/100 km”.
●
When the display is set to “km/L”,
the distance that can be traveled
on 1.0 L of fuel under the current
riding conditions is shown.
1. Ambient temperature/instantaneous fuel
consumption/average fuel consumption
2. “SELECT” button
3. “RESET” button
1. Ambient temperature
1. Instantaneous fuel consumption
U5P520E0.book Page 9 Thursday, March 13, 2008 1:41 PM
ProCarManuals.com