Yamaha Fazer 1000-EXUP, Руководство пользователя

Страница: 20 / 112

INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
EAU03954
Tachometer unit
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
EC000003
CAUTION:
_
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11,500 r/min and above
_
This tachometer unit is equipped with a
clock.
To set the clock:
1. Push both the “SELECT” and
“RESET” buttons for at least two
seconds.
2. When the hour digits start flashing,
push the “RESET” button to set
the hours.
3. Push the “SELECT” button to
change the minutes.
4. When the minute digits start flash-
ing, push the “RESET” button to
set the minutes.
5. Push the “SELECT” button to start
the clock.
NOTE:
_
After setting the clock, be sure to push
the “SELECT” button before turning the
key to “OFF”, otherwise the clock will
not be set.
_
EAU04290
Self-diagnosis devices
This model is equipped with a self-di-
agnosis device for the following electri-
cal circuits:
●
throttle position sensor
●
speed sensor
●
EXUP system
●
overturn switch
If any of those circuits are defective,
the tachometer will repeatedly display
the following error code:
CB-23E
Use the chart below to identify the
faulty electrical circuit.
CB-29E
1. Tachometer
2. Tachometer red zone
3. Clock
Specific r/min Faulty electrical circuit
3,000 r/min Throttle position sensor
4,000 r/min Speed sensor
7,000 r/min EXUP system
9,000 r/min Overturn switch
0
r/min for
3 seconds
Circuit-specific
number of r/min
for 2.5 seconds
(See the table
below.) Current
engine
speed for
3 seconds
U5LVE2.book Page 5 Thursday, June 27, 2002 5:23 PM