Maintenance
62
NOTE:
When transporting the outboard motor in a
horizontal position, place a towel or some-
thing similar under the outboard motor to pro-
tect it from damage.
EMU28241
Storing outboard motor
When storing your Yamaha outboard motor
for prolonged periods of time (2 months or
longer), several important procedures must
be performed to prevent excessive damage.
It is advisable to have your outboard motor
serviced by an authorized Yamaha dealer pri-
or to storage. However, you, the owner, with a
minimum of tools, can perform the following
procedures.
CAUTION:
ECM01080
●
To prevent problems which can be
caused by oil entering the cylinder from
the sump, keep the outboard motor in
the attitude shown when transporting
and storing it. If storing or transporting
the outboard motor on its side (not up-
right), put it on a cushion after draining
the engine oil.
●
Do not place the outboard motor on its
side before the cooling water has
drained from it completely, otherwise
water may enter the cylinder through the
exhaust port and cause engine trouble.
●
Store the outboard motor in a dry, well-
ventilated place, not in direct sunlight.
EMU28303
Procedure
EMU32041
Flushing in a test tank
1.
Dismount the outboard motor from the
boat. For further details, see page 60.
2.
Wash the outboard motor body using
fresh water. For further information, see
page 65.
3.
Fill the fuel tank with fresh fuel and add
one ounce of “Yamaha Fuel Conditioner
and Stabilizer” to each gallon of fuel.
NOTE:
The use of “Yamaha Fuel Conditioner and
Stabilizer” eliminates the need to drain the
fuel system. Consult your Yamaha dealer or
other qualified mechanic if the fuel system is
to be drained instead.
4.
Disconnect the fuel line from the out-
board motor.
5.
Remove the engine top cowling and si-
lencer cover. Remove the propeller. For
further details, see page 76.
6.
Position the outboard motor on a water
tank. For further details, see page 31.
7.
Fill the tank with fresh water to above the
level of the anti-cavitation plate.
CAUTION:
ECM00300
Do not run the engine without supplying it
with cooling water. Either the engine water
pump will be damaged or the engine will
1. Water surface
2. Lowest water level
ZMU02051
1
2
U6AU11E0.book Page 62 Friday, September 7, 2007 10:51 AM
©
2019 Yamaha Motor Corporation, U.S.A.
Содержание F9.9F
Страница 101: ...U6AU11E0 book Page 95 Friday September 7 2007 10 51 AM 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A ...
Страница 102: ...A5 tate_Blank fm Page 1 Friday May 16 2003 9 00 AM 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A ...
Страница 103: ...A5 tate_Blank fm Page 1 Friday May 16 2003 9 00 AM 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A ...